Epoxy Food - Thick Epoxy Resin

Epoxy Food - a safe, certified epoxy resin for contact with cold food - a two-component system for creating a finishing layer on the finished product.

• European quality - straight from Italy
• Good for: Trays, Chopping boards, Plates, Glasses and Cutlery
• Food safe: Certified for contact with cold snacks
• Perfect transparency: A true liquid crystal
• UV filter for protection against yellowing
• Easy to use: 100:55 mixing ratio (in weight)
• Excellent mechanical resistance
• Perfect gloss finish
• Odourless

Two-component epoxy resin: component A + component B

Proportions by weight: 100:55

Important! Epoxy resin specifications: no more than 55% humidity and 22-25°C temperature

This resin can be used to create a coating that is safe for contact with cold food only if the finish does not contain dyes, pigments or other additives!

Epoxy resin for food contact. The particular formula makes the product, once cured, perfectly compatible with any type of food and is guaranteed by a specific certification.
High quality. Perfectly transparent even after catalysis. Totally shiny and self-leveling, complete catalysis will take about 24/48 hours – depending on atmospheric and environmental conditions – but it will already be workable after about 10 hours.
Safe and certified. All our resins are Certified Non-Toxic, Solvent-free, non-flammable, and totally safe. Certified for contact with cold snacks.
Easy to use. The 100:55 mixing ratio makes this product very easy to use. Being a two-component resin, simply mix resin A + hardener B in the ratio indicated above the package and let it harden without the need for further additives. 

Specifications:

• Mixing ratio: 100:55 by weight
• Working time after mixing components A+B: about 25-30 minutes
• Recommended air humidity is no more than 55%, recommended temperature is 22-25°C
• We recommend using it as a protective finishing layer, pouring thickness: 2-3 mm
• Epoxy resin polymerization time: complete polymerization occurs in approximately 24-48 hours, depending on the humidity and temperature in the room
• Volumetric mass: 1.08±0.02 kg/l
• Hardness: Shore D 82-87 (ASTM D 2240)
• Minimum storage temperature: +15°C

Attention! Do not mix with dyes, pigments and other additives so that the resin does not lose its properties (food grade)!

Important! Epoxy resins (component A), especially thick ones, may become cloudy and white when stored at temperatures below +15°C. This process is called epoxy resin crystallization. In simple words, freezing of epoxy resin.
To return transparency to the epoxy resin, take the bottle (component A), screw the cap tightly and place it in hot water at 80-90°C. After about 30-40 minutes, the resin will become transparent. The larger the volume of epoxy resin, the longer it takes to defrost. The resin becomes transparent when the epoxy heats up to 50°C.
Allow the epoxy resin to cool completely before starting work!