EcoSoya CB-Advanced – Soy Wax for Container Candles

EcoSoya CB-Advanced is a fully formulated, single-pour, all-natural soy wax designed specifically for container candles and requires no additional additives.

EcoSoya CB-Advanced is an advanced container blend with excellent hot and cold scent throw, superior glass adhesion, a smooth even surface, and high resistance to frosting. This wax supports fragrance loads of up to 12%.

This is the same legendary EcoSoya formula that has remained one of the leading soy waxes in the EU and USA for nearly 20 years, now updated and manufactured by Kerax in the United Kingdom.

It has a low melting point and is suitable for both container candles and massage candles.

Key Features

• Single-pour soy wax blend
• Excellent hot & cold scent throw
• Superior glass adhesion
• Smooth creamy surface
• High frost resistance
• Supports up to 12% fragrance load
• No additives required
• Suitable for massage candles
• Biodegradable and eco-friendly

Recommended Wax Temperatures

Technical Specifications

Recommendations

1. Pouring

The recommended pouring temperature range is 55–65 °C. The exact temperature may vary depending on additives and should be determined through testing.

Pouring temperatures can vary depending on:

• Container type and size
• Fragrance oil used
• Dye concentration
• Desired candle finish and appearance

Fragrance oil should be added and mixed immediately before pouring to preserve fragrance integrity and improve scent throw.

If you experience difficulties with pouring temperature, test slightly lower or higher temperatures in 5 °C increments.

Preheating containers is also recommended.

2. Additives (Fragrance Oils & Dyes)

The maximum recommended fragrance load is 12%. Adding more may cause issues with solubility and wax curing.

For best results:

• Use fragrance oils designed for natural waxes
• Select the correct wick carefully
• Test fragrance performance thoroughly

The size and depth of the melt pool significantly affect scent throw.

3. Temperature Conditions

Add additives at 60–70 °C.

Mixing can be performed:

• In a double boiler
• In a wax melter
• In professional melting equipment

4. Mixing

Gently stir the fragrance oil into the wax for several minutes until fully dissolved.

Avoid aggressive stirring to minimize air bubbles.

5. Overheating

Do not heat the wax above 90 °C.

Overheating may negatively affect:

• Wax quality
• Fragrance performance
• Surface appearance
• Final candle texture

6. Curing

Minimum curing time: 48 hours.

For optimal fragrance strength and performance, experts recommend curing candles for approximately 10–14 days.

The first burn test should be performed no earlier than 2–3 days after pouring.

Important Notice

For the best results and highest candle quality, we strongly recommend conducting your own testing for:

• Pouring temperatures
• Fragrance load
• Dye concentration
• Wick selection
• Curing conditions

Many factors affect candle quality, color, and fragrance performance, including:

• Room temperature and humidity
• Quality of raw materials
• Container size
• Wax heating and pouring conditions
• Amount of additives used
• Wick size and quality
• Environmental curing conditions